Network Cable Tester Cum PoE Wire Tracker

H8C-8209 is a new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode. That means it’s equipped with the most powerful cable location technologies for any work environment. Also, it includes cable length measurement, cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.

Technical Specifications
Transmitter Wiremap Cable type CAT5、CAT6 (STP & UTP)
Test with switch directly Yes
Max range 600m
Length Cable type CAT5、CAT6 (STP & UTP)
Test range 2~200m
Accuracy ±1.6m
Breakage location Yes
Scan Cable type CAT5、CAT6 (STP & UTP)
Max. signal voltage 8Vp-p
Frequency 130KHz
AC filter  Yes
Max range 600m
POE Test range DC 5~60V standard / non-standard PoE switch
Voltage display Yes
PSE type IEE​E 802.3af/at
LCD display 128*64 Dot-matrix with backlight
Power supply AAA*3
Low battary warning 2.7V
Auto-off time 15min、30min、60min、OFF
Voltage protection DC48V 5mA
Max working current <150mA
Receiver Sentivity adjustable Yes
AC Voltage detecting Yes
Lamp Yes
Battary type 9V*1
Low battary warning 6± 0.5V
Max working current <100mA
Remote Wiremap Port RJ45
Voltage protection DC48V 5mA
Key Features

1. Three scan modes selectable: AC filter mode/ Analog mode/ PoE mode

2. Detect AC voltage presence (50V-1000V).

3. Test physical status for STP, UTP lan cable.

4. Measure cable length accurately , the range is 200m.

5. Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.

6. PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard)

How to order?
H8C-8209 - Network Cable Tester LCD with Length Measurement function with PoE Wire Tracker & Probe Kit